STEVENSONS PAINTS
Products
Stevensons Architect Kitchen & Bathroom
Short description
Low odour premium quality non-drip, water based enamel for interior and exterior application with a smooth satin finish that is ideal for areas with high humidity, condensation and grease caused by cooking, and frequent washings.
Intended Uses
For application to suitably primed new and old cement plaster walls, fibre-board, ceiling board, gypsum plaster, ceiling boards, metal and wood.
Details
- Type: Enamel
- Ranges: Architect Range, Stevensons
- Project: Interior, Kitchen & Bathroom
- Available-sizes: 1L, 5L
- Guarantee: 15 Years
- Share:
Features & benefits
- Dries to a tough wall coating and a hard wearing finish
- Virtually no odour
- Non-yellowing
- Turpentine free clean-up: wash brushes and rollers in water
- Quick drying – 2 coats can be applied in one day
- Stain and steam resistant and easily cleaned
- Interior and exterior use
Product information
- Type: Water based Adhesion promoted Pure Acrylic containing mould and mildew resistant additives
- Appearance: Satin Finish
- Colours: White
- Tint Bases: Pastel, Deep, Transparent
- Solid Approx.: 62% by mass; 46% by volume
- S G at 23 °C: Approx.: 1,39
- Flash point: Non-flammable
- Theoretical spreading rate: 8-12m²/ℓ per coat
- Practical spreading rate: The practical spreading rate will vary depending on the porosity and profile of the substrate, as well as the application technique and tools used
Application details
- Mixing: Stir thoroughly with a flat paddle
- Method: Brush, roller or spray
- Thinning: Not recommended - ready for use
- Cleaning: Water
- Drying time: 4 Hours
- Recoating time: 4 Hours
- Application: Apply a minimum of two coats
