fbpx
WelcomeProductsEnamelStevensons Architect Floorkote Enamel

Stevensons Architect Floorkote Enamel

Short description

Premium solvent based Urethane Alkyd enamel for interior and exterior floor surfaces.

Intended Uses

Suitable for application to correctly prepared, concrete, masonry and cement floors surfaces and for redecorating of previously painted floors. For commercial and residential floors Showrooms Light-industrial floors Kitchens and restaurants Garages Stoeps and patios

Details

  • Type: Enamel, Floor Coating
  • Ranges: Architect Range, Stevensons
  • Project: Exterior, Floor & Paving, Interior
  • Available-sizes: 1L, 5L
  • Guarantee: N/A
  • Share:

Features & benefits

  • Excellent wear properties
  • Superior adhesion
  • High solids formulation giving high film build
  • Single component - easy, no-mix formula
  • Polyurethane performance for toughness
  • Excellent scratch, scuff and wear resistance
  • Chemical and stain resistant

Product information

  • Type: Urethane Alkyd Enamel
  • Appearance: Gloss Finish
  • Colours: Standard Colours
  • Tint Bases: N/A
  • Solid Approx.: 54% by mass; 41% by volume
  • S G at 23 °C: Approx.: 1,32
  • Flash point: Non-flammable
  • Theoretical spreading rate: 8-12m² per coat
  • Practical spreading rate: The practical spreading rate will vary depending on the porosity and profile of the substrate, as well as the application technique and tools used

Application details

  • Mixing: Stir thoroughly with a flat paddle
  • Method: Brush, roller or airless spray
  • Thinning: Not recommended - ready for use
  • Cleaning: Mineral turpentine
  • Drying time: 16 Hours
  • Recoating time: 24 Hours
  • Application: Apply a minimum of two coats

Need assistance finding a product? Let us help you.