STEVENSONS PAINTS
Products
Stevensons Tradesman Eggshell Enamel
Short description
Premium quality interior or exterior enamel for surfaces where a durable eggshell finish is required.
Intended Uses
For application to suitably primed new and old cement plaster walls, fibre-board, ceiling board, gypsum plaster, metal and wood. Ideal for trimming.
Details
- Type: Enamel
- Ranges: Stevensons, Tradesman Range
- Project: Door, Window & Trim, Exterior, Gate, Fence & Palisade, Interior
- Available-sizes: 1L, 20L, 5L
- Guarantee: N/A
- Share:
Features & benefits
- Dries to a hardwearing high gloss finish
- Ultra-tough
- Scratch and stain resistant
- High opacity
- Durable
- Fully washable
- UV-resistant
- Interior and exterior use
Product information
- Type: Alkyd Enamel
- Appearance: Eggshell (Low Sheen)
- Colours: White
- Tint Bases: Pastel, Deep, Transparent
- Solid Approx.: 66% by mass and 44% by volume
- S G at 23 °C: Approx.: 1,13
- Flash point: Non-flammable
- Theoretical spreading rate: 9-12m²/ℓ per coat
- Practical spreading rate: The practical spreading rate will vary depending on the porosity and profile of the substrate, as well as the application technique and tools used, all surfaces must be completely dry, moisture contends must be less than 8%
Application details
- Mixing: Stir thoroughly with a flat paddle
- Method: Brush, roller, spray
- Thinning: Not recommended - ready for use
- Cleaning: Mineral turpentine
- Drying time: 4 Hours
- Recoating time: 6 Hours
- Application: Apply a minimum of two coats
